Anti-fogging
Hydrophilic film laminated to tempered glass to prevent fogging.
🚚 Free delivery on orders over SAR 299* | Excludes heavy items
Cookie Policy
I agree to the processing of my data in accordance with the terms set out in the Privacy Policy.Cart
Your cart is empty
The complete snorkelling starter kit: a diving mask with an anti-fog hydrophilic film on tempered glass, and a snorkel with a valve that quickly drains water.
Secure payment
We also offer payment in two, three, or four installments via Tabby and Tamara.
Secure payment
We also offer payment in two, three, or four installments via Tabby and Tamara.
Hydrophilic film laminated to tempered glass to prevent fogging.
Measured field of vision: 16647 mm2
Protect eyes against rays; lenses filter 100% of UVA/UVB rays.
Any water in the snorkel is easily expelled through the purge valve.
The snorkel's volume is adapted to the adult user's morphology.
Description
Sometimes sand or salt gets stuck between the valve and the hard part of the snorkel, this prevents the valve from correctly lying flat and ensuring a watertight seal. In this case, simply rinse the snorkel thoroughly with clean water and check that the valve lies flat.
When Snorkelling, water can enter the snorkel due to immersion or splashing. The valve located at the bottom of the snorkel makes it easier to expel water. Thanks to the valve, most of the water is drained from the bottom, which means the user does not have to blow out so hard. This is unlike a conventional snorkel where the water is drained from the top.
This mask is made from 100% PVC-free materials.
This mask needs no preparation (toothpaste, flame, anti-fog spray) before use. To activate the film, first soak the mask in water and lightly rub the inside of the lens before diving. To optimise the efficiency of the anti-fog system, avoid touching the lens with your fingers that may be greasy (e.g., sun cream). If the lens fogs up, rinse with clean water and rub the inside of the lens lightly with your fingers.
The deflector is the part located at the top of the snorkel. Its curved shape creates a protection limiting the inflow of water through the top of the snorkel. To prevent water from entering your snorkel, we recommend choosing a dry snorkel with a float valve that blocks water.
Hydrophilic film laminated directly onto the glass. This film prevents fogging underwater.
Simply blow out gently to empty the snorkel through the valve. After breathing out, be careful when you breathe back in; inhale slowly as some residual water can remain in the snorkel. When in doubt, do not panic: raise your head out of the water and the snorkel will empty itself instantly through the valve. High-speed intensive swimming is not recommended as it can move the valve and cause water to enter.
Description
Sometimes sand or salt gets stuck between the valve and the hard part of the snorkel, this prevents the valve from correctly lying flat and ensuring a watertight seal. In this case, simply rinse the snorkel thoroughly with clean water and check that the valve lies flat.
When Snorkelling, water can enter the snorkel due to immersion or splashing. The valve located at the bottom of the snorkel makes it easier to expel water. Thanks to the valve, most of the water is drained from the bottom, which means the user does not have to blow out so hard. This is unlike a conventional snorkel where the water is drained from the top.
This mask is made from 100% PVC-free materials.
This mask needs no preparation (toothpaste, flame, anti-fog spray) before use. To activate the film, first soak the mask in water and lightly rub the inside of the lens before diving. To optimise the efficiency of the anti-fog system, avoid touching the lens with your fingers that may be greasy (e.g., sun cream). If the lens fogs up, rinse with clean water and rub the inside of the lens lightly with your fingers.
The deflector is the part located at the top of the snorkel. Its curved shape creates a protection limiting the inflow of water through the top of the snorkel. To prevent water from entering your snorkel, we recommend choosing a dry snorkel with a float valve that blocks water.
Hydrophilic film laminated directly onto the glass. This film prevents fogging underwater.
Simply blow out gently to empty the snorkel through the valve. After breathing out, be careful when you breathe back in; inhale slowly as some residual water can remain in the snorkel. When in doubt, do not panic: raise your head out of the water and the snorkel will empty itself instantly through the valve. High-speed intensive swimming is not recommended as it can move the valve and cause water to enter.
Composition
Composition
0 reviews
Member card
Please log in to view your member card.
Member card
Please log in to view your member card.
Member card
Please log in to view your member card.
Member card
Please log in to view your member card.