Compatibility
100% effective on all inner tubes.
🚚 Free delivery on orders over SAR 299* | Excludes heavy items
Cookie Policy
I agree to the processing of my data in accordance with the terms set out in the Privacy Policy.Cart
Your cart is empty
Need to repair a puncture in an inner tube without using a patch? These 8 self-adhesive patches make for a quick and easy repair, so you can carry on with your bike rides.
Secure payment
We also offer payment in two, three, or four installments via Tabby and Tamara.
Secure payment
We also offer payment in two, three, or four installments via Tabby and Tamara.
100% effective on all inner tubes.
Less restrictive and just as effective as a classic patch.
Easy to stick on and quick to use.
Description
Optimal lifespan: 3 years at room temperature (16-22°C, 30-70% humidity), away from direct light, in original packaging. Minimum temperature for repairs: from +10°C to + 40°C Usage temperature: -40°C to +65°C
A good sanding of the area concerned will give you a better result. The aim is to obtain a flat, clean surface so the patch holds as well as possible. If the puncture is close to excess material, sand until the excess is removed. Sanding will create micro-scratches that will allow the glue on your patch to set more easily. This stage is very important for a lasting repair.
Clean away any impurities to ensure a clean, flat and dry area to apply the patch. Remember: don't use water or any other product to clean your inner tube after sanding. It's essential to have a clean, dry surface to ensure that your patch lasts.
To make sure that your patch remains in place for as long as possible on your repaired inner tube, we strongly recommend that you reinflate your inner tube within 24 hours of applying the patch and that you inflate it to the recommended pressure.
Be careful not to touch the sticky part when positioning the patch, so as not to reduce its sticking power. Remove any air bubbles from the centre of the patch towards the edges. Rub the patch with your finger to warm it up and help it stick better. Finally, press firmly with your thumb, covering the entire patch for 45 seconds to 1 minute (press on a clean, flat surface for greater effectiveness).
1. Remove the inner tube and locate the puncture 2. Sand the area around the puncture using the sandpaper provided (essential step) 3. Clean and dry this area 4. Apply the self-adhesive patch and press hard on the entire area for around 45 seconds 5. Put the inner tube back in the tyre and the tyre in the rim 6. Inflate your tyre to the recommended pressure.
Description
Optimal lifespan: 3 years at room temperature (16-22°C, 30-70% humidity), away from direct light, in original packaging. Minimum temperature for repairs: from +10°C to + 40°C Usage temperature: -40°C to +65°C
A good sanding of the area concerned will give you a better result. The aim is to obtain a flat, clean surface so the patch holds as well as possible. If the puncture is close to excess material, sand until the excess is removed. Sanding will create micro-scratches that will allow the glue on your patch to set more easily. This stage is very important for a lasting repair.
Clean away any impurities to ensure a clean, flat and dry area to apply the patch. Remember: don't use water or any other product to clean your inner tube after sanding. It's essential to have a clean, dry surface to ensure that your patch lasts.
To make sure that your patch remains in place for as long as possible on your repaired inner tube, we strongly recommend that you reinflate your inner tube within 24 hours of applying the patch and that you inflate it to the recommended pressure.
Be careful not to touch the sticky part when positioning the patch, so as not to reduce its sticking power. Remove any air bubbles from the centre of the patch towards the edges. Rub the patch with your finger to warm it up and help it stick better. Finally, press firmly with your thumb, covering the entire patch for 45 seconds to 1 minute (press on a clean, flat surface for greater effectiveness).
1. Remove the inner tube and locate the puncture 2. Sand the area around the puncture using the sandpaper provided (essential step) 3. Clean and dry this area 4. Apply the self-adhesive patch and press hard on the entire area for around 45 seconds 5. Put the inner tube back in the tyre and the tyre in the rim 6. Inflate your tyre to the recommended pressure.
0 reviews
Member card
Please log in to view your member card.
Member card
Please log in to view your member card.
Member card
Please log in to view your member card.
Member card
Please log in to view your member card.